 |
Approved Supplier |
OVC 366FW 2 |
2" 316SS 1000# WOG ball valve W/locking handle
|
 |
PHD Manufacturing, Inc. |
PHD 508EG-REG 3/4 |
3/4" phd 508reg extension pipe clamp
|
 |
Approved Supplier |
PISCO PC1/4-N1U PUSH-IN FITTING 1/4" TUBE X 1/8" NPT MALE STR |
PUSH-IN FITTING 1/4" TUBE X 1/8" NPT MALE STRAIGHT
|
 |
Approved Supplier |
PLC 802-AY5-SUB |
RADWELL LIMIT SWITCH
|
 |
Approved Supplier |
POW 3086-6 |
6" POWELL 300# WCB RF ANGLE VALVE, NON-RETURN
|
 |
PROCESS EQUIPMENT COMPANY |
PRE S202L254C |
GAUGE, PRECISION 2.5" LIQ FILLED 0-30, 1/4" CBM
|
 |
Approved Supplier |
RED 304 SCH10 1-1/2X3/4 |
1-1/2" x 3/4" 304SS SCH10 concentric butt weld reducer
|
 |
Sanitube |
SAN FLGTCR6-800600 |
8" 150# FF FLG X 6" TC ADAPTER 316L
|
 |
Approved Supplier |
SCOT 118.000.343 |
SCOT PUMP REPAIR KIT
|
 |
Approved Supplier |
SER FLG 150 FF THD 2-1/2 |
FLG 150 FF THD 2-1/2
|
 |
Approved Supplier |
SOU GL80WD.050CF |
1/2 800 LB 316L SW GLOBE VALVE
|
 |
Approved Supplier |
ST C630-33 |
3/4MNPTX3/8 SAE FLARE (90DEG)
|
 |
Approved Supplier |
STUD SS 3/4-10X4-1/2 |
3/4"-10 x 4-1/2" stainless steel stud
|
 |
SUNCOR STAINLESS, INC |
SUN S660-A-08 5/16 SS CHAIN |
5/16 316 SS LOG CHAIN
|
 |
Approved Supplier |
THE FLEX HOSE SS1-1/2X4FT /WITH 150#RFSO FLG |
FLEX HOSE SS1-1/2X4FT /WITH 150#RFSO FLG HOT OIL
|
 |
Approved Supplier |
TRI-CLOVER B2CMP-2-316L |
tri-clamp 2" 90 ell
|
 |
Approved Supplier |
ULI S-20541 |
5 GAL BLUE BUCKET LID
|
 |
Approved Supplier |
UNI NTN 6905-2RS |
roller bearing
|
 |
Approved Supplier |
VNE 45C-6-2.0-3 |
2" VNE T316L SPRING CHECK VALVE T/C EPDM
|
 |
Approved Supplier |
WAL 3GB19210 |
TEFLON GASKET
|
 |
WILDE TOOL CO INC |
WIL PP832 |
WIL PP832 1/4" pin punch
|
 |
Approved Supplier |
1-1/4X 3/4 SW RED INSERT 3000 |
1 1/4 x 3/4 (1.670x1.065) socket weld reducer insert 3000
|
 |
Approved Supplier |
#11 ALUM JACKET 90 |
aluminum jacket 90 for 1" x 2" insulation
|
 |
Approved Supplier |
#15 PVC CAP 3 |
3" #15 PVC CAP
|
 |
Approved Supplier |
16C5 |
7/8 Hydraulic Hose, 800 PSI
|
 |
Approved Supplier |
22-3031 SUNDSTRAND HYD MOTOR |
SUNDSTRAND HYD MOTOR 22-3031
|
 |
Approved Supplier |
2” ID X 120” SS SINGLE BRAIDED HOSE |
with 150# (90 degree floating flange o/e and a SS 150# male union o/e
|
 |
Approved Supplier |
2X10-1/2 MCB SS21 XXCS-150 |
2X10 1/2, FLEXHOSE/SS HELICAL / W/150# FLANGES
|
 |
Approved Supplier |
3 150 RF W/N XH |
A105 DOM
|
 |
Approved Supplier |
37CNFHZ |
3/8-16 HEX NUT ZINC
|
 |
Approved Supplier |
37N150WFEZ/PC |
3/8X1-1/2 FENDER WASHER PCS ZINCC
|
 |
Approved Supplier |
387-2-25 |
Top Vented Brass Gauge 1/4"
|
 |
ANVIL INTERNATIONAL INC |
3" AN7721-3 |
3" GRUVLOK BUTTERFLY VALVE W/10 PT HANDLE
|
 |
ANVIL INTERNATIONAL INC |
3" EPDM-ONLY |
3" GRUVLOK RUBBER GASKET
|
 |
Approved Supplier |
3 XH LR 90 .300 |
A234 WPB DOM
|
 |
Approved Supplier |
3 XH SR 90 .300 |
A234 WPB DOM
|
 |
MID-AMERICA FITTINGS INC |
408-16-16 |
408-16-16 flar x 1" mip
|
 |
Approved Supplier |
45 304 4" |
4" 150# THRD 304 45 ELBOW
|
 |
Approved Supplier |
4ST 001-20005 |
FG PC ASJ/SSL 1/2X2 (3LF PER PIECE)
|
 |
Approved Supplier |
4ST 016 SE ALUM CUT AND ROLL 1X1 |
016 SE ALUM CUT AND ROLL 1X1
|
 |
Approved Supplier |
4ST 016 SE ALUM CUT AND ROLL 3/4CTS |
016 SE ALUM CUT AND ROLL 3/4CTS
|
 |
Approved Supplier |
4ST 030-11120 |
PVC 90 ELL #12
|
 |
Approved Supplier |
4ST 030-11150 |
PVC 90 ELL #15
|
 |
Approved Supplier |
4ST 030-70212 |
#12 PVC CUT & ROLLED .020 (4LF PER PIECE)
|
 |
Approved Supplier |
4” X 4’6” SS BRAIDED TRACED HOSE |
4” X 4’6” SS BRAIDED TRACED HOSE
|
 |
Approved Supplier |
577-712SC PROTO |
CLICK-STOP ADJUSTABLE SPUD WRENCH 1-1/2"X16"
|
 |
Approved Supplier |
62C350HX8 |
5/8" X 11 X 3-1/2" STAINLESS STEEL BOLT
|
 |
Approved Supplier |
62CNNES |
5/8"-11 NYLON INSEERT STAINLESS STEEL LOCKK NUT
|
 |
Approved Supplier |
6"X12" FF/304-SS HOSE & BRAID W/150# 304SS FLANGES |
6"X12" FF/304-SS HOSE & BRAID W/150# 304SS FLANGES
|
 |
Approved Supplier |
75CNNES |
3/4" - 10 NYLON INSERT STAINLESS STEEL LOCK NUT
|
