Description
Russellstoll® Max-Gard® Male Inlet, 3-Phase Waterproof, 600 VAC, 60 A, 60 Hz Frequency, 3 Pole, 4 Wires, NEMA 4X/6, Industrial Grade, -40 to 130 deg C, Pressure-Type Solderless Screw Terminal, Copper-Free Cast Aluminum, 5-1/2 in H Dimensions
Features:
- With 2-control contacts
- Without adapter and junction box
- Waterproof construction provides environmental separation at the front of each device (they dont have to be connected together just to be called "watertight")
- All receptacles and connectors must have a rotating disk on the face of the interior, which provides live contact isolation and environmental separation
- All devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulation cavity, making it impossible to withdraw a live plug
- Watertight capability shall be obtained by using a gasketed screw cap
- All devices shall be factory polarized for amperage, voltage, frequency and phase, thus providing a single voltage rating, single interface system
- The grounding of the device shall be accomplished through a separate center ground (earth) make first and break last pole on all devices for complete system grounding
- All devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connector bodies
Applications:
For trade show exhibits and concerts
Standards/Approval:
- UL 1010/231/1682/1686 File No. E2630/E57324/E68085/E123752
- CSA C22.2 182.1 File No. LR14096
- MIL-STD-105
- ASTM D570/D2565
- OSHA Compliant
- IEC 309-1
