Description
Bradford White® Defender Safety System® Gas Water Heater, 32000 Btu/hr Heating, Liquid Propane Fuel, 1/2 in Gas Connection, 30 gal Tank, Piezo Ignition, Atmospheric Vent, 3 x 4 in Vent, 34 gph Recovery Rate, 0.54, 3/4 in NPT Water Connection, 150 psi Pressure, No Ultra Low NOx, 18 in Dia x 21-5/8 in D x 59-1/8 in H, Domestic
Features:
- Advanced ScreenLok® technology flame arrester design: Flame arrester is designed to prevent ignition of flammable vapor outside of the water heater
- Resettable thermal switch: Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow
- Piezo igniter: Easy and quick lighting of the pilot burner by pushbutton
- Pedestal base: Rugged and durable base allows easy transport, positioning and provides corrosion resistant contact with floor
- Maintenance free: No regular cleaning of air inlet openings or flame arrester is required under normal conditions
- Sight window: Offers a view into the combustion chamber to observe the operation of the pilot and burner
- Housing and urban development: This water heater is designed in accordance with H.U.D. and is certified for installation in a manufactured home (mobile home) only and must be installed in an enclosure that will completely separate the water heater combustion and venting system from the dwelling interior
- Must order roof jack kit for new installations
- Vitraglas® lining
- Fully automatic controls: Automatic temperature selection at your fingertips, built-in energy cut-off switch prevents abnormally high water temperature for extra safety, built-in gas pressure regulation
- Convertible gas control: Easily convertible control for use with either propane or natural gas
- Insulation system: 2 in non-CFC foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity
- Water connections: 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
- Heat traps: Installed on hot water outlet to minimize heat loss through piping
- Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service
- 3 x 4 in "Snap Lock" draft diverter: Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less
- Flue baffle: Maximizes the amount of heat absorbed by the tank and reduces heat loss during standby periods
- Steel tank: Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass lining
- Low restriction brass drain valve: Durable tamper proof design
- FVIR defender safety System®
Applications:
Residential Application
Standards/Approval:
- AHRI Certified
- ANSI Z21.10.1-2014
- ASHRAE 90.1b
- CEC Listed
- CSA 4.1-2014
- CSA International (Formerly AGA/CGA)
- CSA LLC - Low Lead Compliant
- HUD Certified
- Massachusetts Approved
- NAECA Compliant
- NSF 372
- PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Warranty:
6 Years Limited on Tank/6 Years Limited on Component Parts
