Description
Crouse-Hinds Ground Fault Circuit Interrupter, Dust Ignition Proof Explosionproof, 125 V AC, 20 A, 5 mA Trip, NEMA 3/7C/7D/9E/9F/9G/12 Enclosure, 3.5 in W x 5.67 in D Dimensions, Copper Free Aluminum, Natural
Features:
- No additional sealing is required when proper body is used
- GFCI protects personnel against possible injury due to unwanted ground faults
- A GFS ground-fault circuit interrupter reduces the hazards of ground-fault currents that can cause loss of life
- Upon detecting a ground-fault current (exceeding 5 mA) in the protected branch circuit, the GFS unit will trip, interrupting power
- GFCI is feed-through type to serve several receptacles
- Decentralized GFCI protection ON branch circuits permits immediate identification of circuit where a ground-fault is occurring
- Does not interrupt power ON total branch circuit if tripped or when periodically tested
- Significantly reduces incidence of nuisance tripping, provides for use of 125 VAC portable lighting even when working ON metal floors or catwalks
- Can be installed ON any Eaton's Crouse Hinds single or multiple gang EDS or EDSC device box
- Sand cast copper free aluminum cover
- Die cast copper free aluminum sealing well
- Stainless steel pushbuttons and guards
- Neoprene shaft seals
- Polycarbonate interior body and brass contacts
Standards/Approval:
- NEC Approved
- CEC Class I, Groups B, C, D, Class II, Groups E, F, G, Class III
- CSA C22.2 No. 25, 30, 144 Class I, Groups B, C, D
Warranty:
Limited
