Description
Crouse-Hinds Line Starter Enclosure, Magnetic Single-Speed Non-Reversing, 19.88 in Width, 11 in Depth, NEMA 3/3R/4/4X/12/7BCD/9EFG, Hinged Cover, Lock: Padlock, 120/600 V AC, Tap-On/Feet Mount, Copper-Free Aluminum
Features:
- Rugged, corrosion-resistant, cast copper-free aluminum construction
- Motor starter operating handle located through the right side wall of the body permits visual confirmation of correct component assembly and operation
- Total compliance to the wiring end room requirements of the national electrical code and Canadian electrical code
- Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
- Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
- copper-free aluminum hinges allow the cover to swing well out of the way
- Stainless steel, quick release, captive, hex head cover bolts
- Stainless steel springs provide clear indication cover bolts are fully retracted from body
- Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers' starters
- Simple, straightforward installation of starter on pre-drilled mounting plate within enclosure, mounting plate also field removable
- Neoprene cover gasket permanently attached to the cover seals out moisture
- Bodies have top and bottom drilled and tapped entrances for power conduits plus one at the bottom for control conduit, removable reducers are supplied as standard, to accommodate smaller size conduits, all conduit entrances are plugged
- To provide motor overload and under voltage protection
- Steel bracket for lifting larger enclosures during installation supplied as standard
- In areas where frequent wash downs are necessary or where heavy rain or water spray is prevalent
- For across the line starting, stopping, speed changing and reversing of polyphase AC induction motors
- Size 3, 4 FVNR starter
- H enclosure size symbol
- 3 in J conduit entry trade
- Without starter
Applications:
For damp, wet, dirty, dusty hazardous locations and EBMS magnetic line starters
Standards/Approval:
- CSA C22.2 File No. 30
- Class I, Div 1, 2 Groups B, C, D, Class II, Div 1, 2 Groups E, F, G, Class III
- UL 120
