Description
Crouse-Hinds Disconnect Enclosure, Dust-Ignitionproof Explosionproof Watertight, 14.46 in Width, 10-1/4 in Depth, 29.4 in Height, NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12, 100 A, Copper-Free Aluminum
Features:
- Rugged corrosion-resistant cast copper-free aluminum construction
- Switch operating handle is located through the right side wall of the body, permits visual confirmation of correct alignment and operation
- Total compliance to the wiring end room requirements of the National Electrical Code®
- Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
- Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
- Stainless steel hinges allow the cover to swing well out of the way
- Stainless steel quick release captive hex head cover bolts
- Stainless steel springs provide clear indication cover bolts are fully retracted from body
- Neoprene cover gasket permanently attached to the cover seals out moisture
- Bodies have top and bottom drilled and tapped conduit entrances for power and conduits
- Removable reducers are supplied as standard, to accommodate smaller size conduits
- All conduit entrances are plugged
- Tap-on mounting feet
- Without switch
Applications:
For used to disconnect motor, lighting and other circuits, in locations made hazardous by the presence of flammable gases or vapors or ignitable dusts, indoors or outdoors in damp, wet and dirty locations or in areas where frequent washdowns, heavy rain or water spray is prevalent, to provide disconnect means and short circuit protection (fusible version)
Standards/Approval:
- CSA C22.2 File No. 30
- UL 1203
