Description
Crouse-Hinds Arktite® Interlocked Receptacle, Raintight, Series: EBBR, 480 VAC, 250 VDC, 60 A, 4 Pole, 3 Wires, NEMA 3/3R/7B/7C/7D/9F/9G/12 NEMA Rating, Copper-Free Aluminum, 14.06 in W x 10.25 in D x 23.95 in H Dimensions
Features:
- Rugged, corrosion-resistant, cast copper-free aluminum construction
- Accepts compatible Arktite® plug of same rating and configuration
- Mechanical interlock mechanism for dead front construction
- Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
- A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the circuit breaker operating mechanism for safe and dependable operation
- Plug and receptacle contact cannot be made or broken under load
- Operating handles can be padlocked in either ON or off positions, breakers are trip-free of the handles and will open under short circuit or overload even if the handle is locked in the ON position
- Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
- Total compliance to the wiring and room requirements of the national electrical code
- Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover makes interior components easily accessible
- Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
- Copper-free aluminum hinges allow the cover to swing well out of the way
- Stainless steel, quick release, captive, hexagonal cover bolts
- Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers breakers
- Simple, straightforward installation of breaker on pre-drilled mounting plate within enclosure
- Neoprene cover gasket permanently attached to the cover seals out moisture
- Bodies have top drilled and tapped entrance for power conduit (11/2 in) plus one at the top and one at the bottom for a breather and drain (1/2 in)
- Tap-on mounting feet
- Dust-ignitionproof construction
Applications:
Industrial Facilities and Factories, Facility, Power Distribution and Control Applications
Standards/Approval:
- NEC Certified
- UL File No. 1203
