P4B-E-207R-MOD Bearings - Dodge Industrial Baldor Reliance Electric

Description

Dodge®, 145597, Pillow Block Roller Bearing Unit, Type E, 2-7/16 in Bore, 8.31 to 8.69 in Bolt Center-to-Center Length, 2.75 in Base to Bore Centerline, 10.5 in Overall Length, 4 in Overall Width, 5.63 in Overall Height, Four-Bolt Base Mounting, 3-1/2 in Base Width, Set Screw Locking Device, XTS Triple-Lip Seal, Non-Expansion (Fixed), 11800 lb Dynamic/54000 lb Static Load, 2420 rpm Maximum, Cast Iron

Features:

• Factory-assembled to be shaft-ready out of the box
• Case hardened rollers and races
• Factory-filled with Dodge engineering-approved NGLI grade 2 lithium-complex grease
• 65-degree set screw angle maximizes holding power compared to competitive 90- and 120-degree angles
• Mechanically-retained XTS triple-lip seal
• Oversized Springlok collars act as flingers for added protection
• Pre-drilled and tapped to be sensor-ready

Base to Bore Centerline	2.75 in
Base Width	3-1/2 in
Bolt Center-to-Center Length	8.31 to 8.69 in
Bore Diameter	2-7/16 in
Expansion Type	Non-Expansion (Fixed)
Load Capacity	11800 lb Dynamic/54000 lb Static
Locking Device	Set Screw
Material	Cast Iron
Maximum Speed	2420 rpm
Mounting Type	Four-Bolt Base
Overall Height	5.63 in
Overall Length	10.5 in
Overall Width	4 in
Seal Type	XTS Triple-Lip
Type	Type E
Manufacturer	Baldor Reliance Electric