The OR 64,60 5,70 90 NBR N9012Z O-ring by Freudenberg-NOK is crafted for robust sealing applications. With an outer diameter of 64.60 mm and a cross-section of 5.70 mm, this O-ring is made from 90 Shore A NBR (nitrile rubber), providing excellent oil and fuel resistance. It is designed to withstand high pressures and is ideal for automotive and industrial applications. This O-ring meets industry standards, ensuring a reliable seal in various environments.
Description
DICHTOMATIK O-Ring, 64.6 mm Inside Dia, 76 mm Outside Dia, Cross Section: 5.7 mm, Circular Torus Cross Section, 90 Shore A Durometer, 40 to 120 deg F, Nitrile Rubber, Black
Features:
- NBR is a very commonly used material for O-rings because of its good mechanical properties, its resistance to lubricants and greases and its relatively low cost
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
Applications:
Hydraulics, Pneumatics, Vacuum Applications, Fittings Industry, Automotive Industry and Plant and Mechanical Engineering
Standards/Approval:
- ASTM D1418
- AS 568B
- BS 1806
- JIS 2401
- ISD Certified
- NFPA Listed
- PTDA Certified
