Description
Zoeller®, 912-1142, Sewage Ejector System, Pre-Assembled, Series: 912, 90 gpm Flow Rate, 2 in Outlet, 115 V, 9.4 A, 1 ph, 4/10 hp, 18 ft Maximum Head, 2 in NPT Discharge Pipe, Specifications: Non-Clogging Vortex Impeller, 130 deg F, 2 in Solids Handling, Cast Iron, 1725 rpm Motor
Features:
- As with all Zoeller pumps, the Model 264 is 100% Factory Tested
- The Model 264 sewage pump is built with an engineered plastic base and vortex impeller capable of handling 2 in spherical solids reducing the chance of clogs and downtime
- The pump's 115 V electrical cord seal is sealed in the cover
- Can be installed outdoors with a Riser (10-5157)
- The single piggyback pump switch is installed 180 deg from the 4 in inlet to prevent the float from being affected by the inflow of raw sewage
- The discharge pipe is plumbed with a pre-drilled 3/16 in weep hole to prevent the pump from becoming air-locked
- The polyethylene cover comes sealed and bolted down so the system is water and gas tight eliminating the escape of any odor
- The clear construction cover can be removed once concrete is poured and finished
Applications:
Sewage Ejector
Warranty:
3 Years Limited
