Marathon® AC Motor, 1 hp, 115/208-230 V, 4-Pole, 1725 rpm

Description

Marathon® AC Motor, 4-Pole Continuous Duty, Farm Duty Motors Application, Capacitor Start Motors Special Features, 1 hp, 115/208 to 230 V AC, 10.6/5.5 to 5.3 A, 60 Hz Frequency, 1 ph, 1725 rpm Speed, 1 Speed, TENV Enclosure, 56 Frame, 0.63 in Dia x 1.88 in L Shaft, CW/CCW Rotation, 1.3 Service Factor, Ball Bearing, Resilient Base Mounting, 40 deg C, Insulation Class: Class B, Rolled Steel, 11.38 in L x 6.54 in W x 8.18 in H

Features:

• Thermal protection
• Fully gasketed
• Double-shielded bearings extend the service life of the motor
• EXXON Polyrex EM Grease supports extreme temperatures between -20 deg F(-29 deg C) and +350 deg F(+177 deg C)
• Shaft flingers protect bearings from damage caused by dirt and rain
• Condensation drains allow the motor to expel and drain built-up moisture
• Blue Chip quality, 100 Percent cast iron construction for rigidity and reduced vibration
• Internal and external epoxy paint
• CR200 Corona resistant magnet wire
• Normally closed thermostats (one per phase, Class H)
• Heat stabilized ball bearings and high temperature grease
• Extended grease tubes, Regreasable in service
• 8 Foot Leads

Standards/Approval:

• CSA Certified
• UL Listed

Amperage Rating	10.6/5.5 to 5.3 A
Application Type	Farm Duty Motors
Bearing Type	Ball
Dimensions	11.38 in L x 6.54 in W x 8.18 in H
Enclosure Type	TENV
Frame	56
Frequency Rating	60 Hz
Horsepower	1 hp
Insulation Class	Class B
Material	Rolled Steel
Mounting Type	Resilient Base
Number of Speeds	1
Phase	1
Rotation	CW/CCW
Service Factor	1.3
Shaft Size	0.63 in Dia x 1.88 in L
Special Features	Capacitor Start Motors
Manufacturer	Marathon®