Marathon® 0.75 hp AC Motor, 230/460 V, 1725 rpm, TENV

Description

Marathon® AC Motor, 4-Pole Continuous Duty, Brake Motors Application, Inverter Ready Special Features, 0.75 hp, 230/460 V AC, 2.5/1.25 A, 60 Hz Frequency, 3 ph, 1725 rpm Speed, 1 Speed, TENV Enclosure, 56C Frame, 0.63 in Dia x 1.93 in L Shaft, Reversible Rotation, 1 Service Factor, Ball Bearing, 40.5 ft-lb Torque, Round/C-Face/Footless Mounting, 40 deg C, Insulation Class: Class B, Rolled Steel, 14.56 in L Dimensions

Features:

• Brake has manual wear adjustment for longer pad life
• Brake leads routed through motor conduit box (TENV only)
• CR200 corona resistant magnet wire
• Horizontal motor orientation
• Squirrel cage induction run
• Fail-safe, spring set brake allows holding or stopping
• Brake coil voltage matches motor voltage
• Manual release lever on rear of brake housing
• Universal mounting for implementation in a range of applications
• Blue Chip quality, 100 Percent cast iron construction for rigidity and reduced vibration
• Internal and external epoxy paint
• Precision balanced to .08 in/sec, Extended grease tubes
• Normally closed thermostats (must be connected to control circuit)
• Roller bearing on shaft end for belted load only

Standards/Approval:

• CSA Certified
• EISA Compliant
• NEMA Premium® Efficiency
• UL Listed

Amperage Rating	2.5/1.25 A
Application Type	Brake Motors
Bearing Type	Ball
Dimensions	14.56 in L
Enclosure Type	TENV
Frame	56C
Frequency Rating	60 Hz
Horsepower	0.75 hp
Insulation Class	Class B
Material	Rolled Steel
Mounting Type	Round/C-Face/Footless
Number of Speeds	1
Phase	3
Rotation	Reversible
Service Factor	1
Shaft Size	0.63 in Dia x 1.93 in L
Special Features	Inverter Ready
Manufacturer	Marathon®