Description
LEESON®® AC Motor, 6-Pole Continuous Duty, Condenser Fan Motors Application, 1.5 hp, 208 to 230/460 V AC, 5.1 to 5/2.5 A, 60 Hz Frequency, 3 ph, 1140 rpm Speed, 1 Speed, DP Enclosure, 56HZ Frame, 0.63 in Dia x 6 in L Shaft, CW/CCW Rotation, 1 Service Factor, Ball Bearing, Welded Base Mounting, 65 deg C, Insulation Class: Class B, Rolled Steel, 16.77 in L x 6.54 in W Dimensions
Features:
- Enclosed shaft end bracket with vented frame
- Threaded lead exit
- 4 locating screws 90 deg apart, 3.33 in from outer edge of shaft slinger
- Hubs on both ends will accept resilient base kits
- External and internal shaft slinger on all models
- Vertical shaft motor orientation
- Automatic reset thermal protector prevents overheating
- Permanently lubricated, double-sealed bearings extend the lifetime of the motor
- Ambient temperature up to 70 deg C allows for consistent operation in a range of environments and applications
- Vertical/horizontal mounting for proper placement of the fan within airflow
- Constant torque operation from 0 to base speed on vector drive, including TEFC (On Volts/Hertz) drives, TEFC motors are limited to 20:1 constant torque
- Normally closed thermostats (one per phase, class F)
- Blue Chip quality, cast iron frame and brackets
- Separate 230/460 V power supply required for 1 HP blower motor
Applications:
Trane, Carrier, Climatrol and York units
Standards/Approval:
