Marathon® SYMAX® AC Motor, 3 hp, 230/460 V, 1800 rpm, TENV

Description

Marathon® SYMAX® AC Motor, 6-Pole Continuous-Duty, Synchronous Permanent Magnet AC Motors Special Features, 3 hp, 230/460 V AC, 6.8/3.4 A, 90 Hz Frequency, 3 ph, 1800 rpm Speed, 1 Speed, TENV Enclosure, 182TC Frame, 1.13 in Dia x 2.62 in L Shaft, Reversible Rotation, 1 Service Factor, Ball Bearing, 13.13 ft-lb Torque, Rigid Base Mounting, 40 deg C, Insulation Class: Class H, Cast Iron, 20:1 Open Loop/1000:1 Closed Loop Constant Torque Speed, 17.5 in L x 13.4 in W x 11.27 in H Dimensions

Features:

• Cast iron construction for rigidity and reduced vibration
• Normally closed thermostats (must be connected to control circuit)
• Horizontal motor orientation
• High power density, low weight design
• Requires drive for operation / Provisions for optional BCP (Bearing Current Protection)
• Class H MAX GUARD insulation system/ IP54 ingress protection
• Constant torque operation from 0 to base speed on vector drive, including TEFC (On Volts/Hertz) drives, TEFC motors are limited to 20:1 constant torque
• Blue Chip quality, cast iron frame and brackets
• Premium severe duty

Standards/Approval:

• NEMA Premium® Efficiency
• UL Listed

Warranty:

3 Years

Amperage Rating	6.8/3.4 A
Bearing Type	Ball
Constant Torque Speed Range	20:1 Open Loop/1000:1 Closed Loop
Dimensions	17.5 in L x 13.4 in W x 11.27 in H
Enclosure Type	TENV
Frame	182TC
Frequency Rating	90 Hz
Horsepower	3 hp
Insulation Class	Class H
Material	Cast Iron
Mounting Type	Rigid Base
Number of Speeds	1
Phase	3
Rotation	Reversible
Service Factor	1
Shaft Size	1.13 in Dia x 2.62 in L
Special Features	Synchronous Permanent Magnet AC Motors
Manufacturer	Marathon®