Description
LEESON®® Blue Chip® AC Motor, 4-Pole Continuous-Duty, Automotive Motors Application, Severe Duty Motors, Inverter Ready Special Features, 2 hp, 460 V AC, 3 A, 60 Hz Frequency, 3 ph, 1740 rpm Speed, 1 Speed, TENV Enclosure, 145T Frame, 0.88 in Dia x 2.56 in L Shaft, Reversible Rotation, 1.15 Service Factor, Ball Bearing, 7.6 ft-lb Torque, Rigid Base Mounting, 40 deg C, Insulation Class: Class F, Cast Iron, 1000:1 Constant Torque Speed, 11.43 in L x 10.79 in W x 7.45 in H Dimensions
Features:
- Bearing Current Protection (BCP)
- Blue Chip® motor quality, 100% cast iron construction for rigidity and reduced vibration
- Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
- Provisions to add stub shaft for an encoder
- Precision balanced to 0.08 in/sec
- Extended grease tubes regreasable in service
- Brass drain and breather
- Meets General Motors® GM® 7E-TA automotive duty, NEMA MG1-1.26.6 waterproof specifications
- Division 2/zone 2 class 1 (gases), groups A, B, C, D
- Meets temperature code T2B
- Actual test and vibration data supplied with each motor
- Horizontal motor orientation
- Squirrel cage inverter rated
- Class F Insulation protects motor for a maximum temperature rating
- Internal corrosion protection extends motor life
- Normally closed thermostats (one per phase, Class F)
- Encoder and brake provisions included on opposite drive end (maximum 10 lb-ft brake,see Modifications and/or Accessory Kits sections)
- Reduced HP at 120 HZ
Applications:
Chemical Plants, Pulp and Paper Mills, Refineries, Above-Ground Mines, Food Processing and Foundries
Standards/Approval:
- CE
- CSA Certified
- IEEE 841
- IEEE45 USCG
- NEMA Premium® XRI® Efficiency
- UL Listed
Warranty:
5 Years
