Description
LEESON®® AC Motor, 4-Pole Continuous Duty, Farm Duty Motors Application, Capacitor Start Motors Special Features, 2 hp, 115/230 V AC, 18.8/9.4 A, 60 Hz Frequency, 1 ph, 1740 rpm Speed, 1 Speed, TEFC Enclosure, 145T Frame, 0.88 in Dia x 2.25 in L Shaft, Selective CCW Rotation, 1.15 Service Factor, Ball Bearing, 11.1 ft-lb Torque, Rigid Base Mounting, 40 deg C, Insulation Class: Class B, Rolled Steel, 14.87 in L x 9.17 in W x 7.34 in H Dimensions
Features:
- Shaft end mechanically locked on c-face models
- Capacitor start/capacitor run design for higher efficiency
- Low temperature manual reset thermal protector
- Totally enclosed and fully gasketed construction for dirty environments
- Condensate drains
- Shaft slinger
- Horizontal motor orientation
- Double-shielded bearings extend the service life of the motor
- EXXON Polyrex EM Grease supports extreme temperatures between -20 deg F(-29 deg C) and +350 deg F(+177 deg C)
- Shaft flingers protect bearings from damage caused by dirt and rain
- Condensation drains allow the motor to expel and drain built-up moisture
- Constant Torque operation from 0 to base speed on Vector Drive
- Normally closed thermostats (one per phase, Class F)
- Encoder and brake provisions included on opposite drive end (maximum 10 lb-ft brake,see Modifications and/or Accessory Kits sections)
- Reduced HP at 120 HZ
Standards/Approval:
- CE
- CSA Certified
- UL Listed
