Description
LEESON®®Condenser Fan/Heat Motor, 6-Pole, Across The Line Starting Method Special Features, 1-1/2 hp, 200 to 230/460 V AC, 5.5 to 5.4/2.7 A, 60 Hz, 3 Phase, 1140 rpm, OPAO, 56Y Frame, 0.63 in Dia Shaft, Reversible, Service Factor: 1, Ball Bearing, 22.5 in-lb, 70 deg C, Insulation Class: Class H, Rolled Steel, 16.06 in L
Features:
- Enclosed shaft end bracket, vented frame
- Nameplated 60/50 Hz, 190/380 VAC at next lower horsepower
- Shaft with flat and keyway
- Threaded lead exit
- Patented VCD™ - (voltage change device)
- 4 locating screws 90 deg apart, 3.33 in from outer edge of shaft slinger
- Hubs on both ends will accept resilient base kits
- Automatic reset thermal protector prevents overheating
- Patented MAXGuard insulation system offers superior protection for use with a variable frequency drive
- Permanently lubricated, double-sealed bearings extend the lifetime of the motor
- Ambient temperature up to 70 deg C allows for consistent operation in a range of environments and applications
- Vertical/horizontal mounting for proper placement of the fan within airflow
- Constant torque operation from 0 to base speed on vector drive, including TEFC (On Volts/Hertz) drives, TEFC motors are limited to 20:1 constant torque
- Normally closed thermostats (one per phase, class F)
- Blue Chip quality, cast iron frame and brackets
Applications:
Trane, Carrier, Climatrol and York Units, 5 Tons and Larger
Standards/Approval:
