Marathon® AC Motor, 0.5 hp, 115/208-230 V, 4-Pole, TEFC

Description

Marathon® AC Motor, 4-Pole Continuous Duty, General Purpose AC Motors Application, Capacitor Start Motors Special Features, 0.5 hp, 115/208 to 230 V AC, 8.8/4.2 to 4.4 A, 60 Hz Frequency, 1 ph, 1725 rpm Speed, 1 Speed, TEFC Enclosure, 56C Frame, 0.63 in Dia x 2.06 in L Shaft, Selective CCW Rotation, 1.15 Service Factor, Ball Bearing, 50.6 ft-lb Torque, Rigid Base Mounting, 40 deg C, Insulation Class: Class B, Rolled Steel, 11.82 in L x 8.96 in W x 8.23 in H Dimensions

Features:

• Ball bearings mechanically locked on shaft end
• Motors accept brake kits
• Suitable for horizontal or vertical mounting
• Horizontal motor orientation
• EXXON Polyrex EM Grease supports extreme temperatures between -20 deg F(-29 deg C) and +350 deg F(+177 deg C)
• Shaft flingers protect bearings from damage caused by dirt and rain
• Condensation drains allow the motor to expel and drain built-up moisture
• Full stainless steel exterior promotes resistance to water and chemical corrosion
• Double sealed bearings extend the lifetime of the motor by combating early signs of bearing failure
• Stainless steel output shaft seals protect against external contaminants
• Insulation systems deliver superior protection against voltage spikes
• Operational at 208-230/460 V at 60HZ

Standards/Approval:

• CE
• CSA Certified
• UL Listed

Amperage Rating	8.8/4.2 to 4.4 A
Application Type	General Purpose AC Motors
Bearing Type	Ball
Dimensions	11.82 in L x 8.96 in W x 8.23 in H
Enclosure Type	TEFC
Frame	56C
Frequency Rating	60 Hz
Horsepower	0.5 hp
Insulation Class	Class B
Material	Rolled Steel
Mounting Type	Rigid Base
Number of Speeds	1
Phase	1
Rotation	Selective CCW
Service Factor	1.15
Shaft Size	0.63 in Dia x 2.06 in L
Special Features	Capacitor Start Motors
Manufacturer	Marathon®