Marathon® AC Motor, 1 hp, 115/230 V, 1725 rpm, TEFC

Description

Marathon® AC Motor, 4-Pole Continuous Duty, Farm Duty Motors Application, Capacitor Start Motors Special Features, 1 hp, 115/208 to 230 V AC, 13.4/6.8 to 6.7 A, 60 Hz Frequency, 1 ph, 1725 rpm Speed, 1 Speed, TEFC Enclosure, 56 Frame, 0.63 in Dia x 2.32 in L Shaft, Selective CCW Rotation, 1.15 Service Factor, Ball Bearing, 88.2 ft-lb Torque, Rigid Base Mounting, 40 deg C, Insulation Class: Class B, Rolled Steel, 12.82 in L x 7.36 in W x 8.34 in H Dimensions

Features:

• Shaft end mechanically locked on c-face models
• Capacitor start/capacitor run design for higher efficiency
• Low temperature manual reset thermal protector
• Totally enclosed and fully gasketed construction for dirty environments
• Condensate drains
• Shaft slinger
• Horizontal motor orientation
• Double-shielded bearings extend the service life of the motor
• EXXON Polyrex EM Grease supports extreme temperatures between -20 deg F(-29 deg C) and +350 deg F(+177 deg C)
• Shaft flingers protect bearings from damage caused by dirt and rain
• Condensation drains allow the motor to expel and drain built-up moisture
• Regreasable bearings

Standards/Approval:

• CSA Certified
• UL Listed

Amperage Rating	13.4/6.8 to 6.7 A
Application Type	Farm Duty Motors
Bearing Type	Ball
Dimensions	12.82 in L x 7.36 in W x 8.34 in H
Enclosure Type	TEFC
Frame	56
Frequency Rating	60 Hz
Horsepower	1 hp
Insulation Class	Class B
Material	Rolled Steel
Mounting Type	Rigid Base
Number of Speeds	1
Phase	1
Rotation	Selective CCW
Service Factor	1.15
Shaft Size	0.63 in Dia x 2.32 in L
Special Features	Capacitor Start Motors
Manufacturer	Marathon®