2" POLY SP CENTRIFUGAL W/ HYD MOTOR - John Blue PSP-3240-PH2

The John Blue PSP-3240-PH2 is a 2-inch self-priming polypropylene centrifugal pump designed for agricultural and industrial applications. It features a hydraulic drive system, eliminating the need for an external engine. The pump is constructed with a polypropylene body, FKM and Viton® seals, and a 316 stainless steel impeller shaft, ensuring excellent chemical resistance. Its double wet seal assembly allows for continuous lubrication of the seal faces, enabling the pump to run dry for extended periods without causing damage. The closed impeller design minimizes thrust loading on the drive motor, extending its life, and the Vac-U-Seal impeller design creates a vacuum between the impeller and mechanical seal, reducing seal wear and resulting in a longer seal life. The pump's maximum flow rate is 200 gallons per minute (GPM), with a maximum pressure of 45 pounds per square inch (PSI). The inlet and outlet ports are 2 inches in diameter with female pipe thread (FPT) connections. The pump operates at a maximum speed of 3,600 revolutions per minute (RPM) and requires a maximum power of 5 horsepower (HP).

• Model: PSP-3240-PH2
• Type: 2" Poly SP Centrifugal, hydraulic drive
• Max Flow: 200 GPM
• Max Pressure: 45 PSI
• Capacity at 25 PSI: 112 GPM
• Max Speed: 3600 RPM
• Max Power: 5 HP
• Inlet & Outlet FPT: 2"
• Material: Polypropylene body, FKM and Viton® seals, 316 stainless steel impeller shaft
• Seal Type: Double wet seal assembly
• Impeller Design: Closed impeller
• Drive Type: Hydraulic motor
• Vacuum Impeller Design: Vac-U-Seal impeller

This item has no supplemental files.