Description
NIBCO® Press System® Ball Valve, 2-Piece, Series: PC-FP-600AS-LF, 1 in Nominal, Press x Press Slip, 250 psi, 250 deg F, Full Port, Media: Hot and Cold Water, 1.14 in Orifice, Standard Lever Handle Actuator, Polished Chrome Brass Ball, 7.49 in Inlet to Outlet Length, 2.58 in Top to Inlet Center, Forged DZR Brass Body, Brass/PTFE Trim, EPDM/PTFE, 10.13 in L x 3.52 in W x 1.89 in H Dimensions, Import
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg F
- Blowout-proof stem
- Reinforced PTFE seat rings
- Multiple handle options
- Press leak-detection feature
- Not intended for gas use
- The Slip ball valve is designed with press-to-connect end connections with a slip side, and an inboard bead with EPDM O-ring for quick and easy copper to copper joinery
- Ideally to be used to add a valve to an existing copper tube or replace a leaky valve
- Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, wat
Applications:
For drinking water, domestic hot and cold water, HVAC (condensers, chilled water, hot water heating), isolation and throttling (half-open to full-open only) and to connect to rigid copper tubing manufactured per ASTM B88, condition H (hard drawn)
Standards/Approval:
- ASTM D2000/C46500
- cUPC Listed
- IAPMO/ANSI Z1157
- IGC 157
- Low Lead Compliant
- MSS SP-145
- NSF/ANSI 61/372
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
2 years
