Description
NIBCO® Press System® Ball Valve, 2-Piece, Series: PC-PX-FP-600A-LF, 1-1/2 in Nominal, Press x F1807 PEX Crimp, 250 psi, 250 deg F, Full Port, Media: Hot and Cold Water, 1.03 in Orifice, Standard Lever Handle Actuator, 316 Stainless Steel Ball, 5.17 in Inlet to Outlet Length, 2.7 in Top to Inlet Center, Forged DZR Brass Body, Brass/PTFE Trim, EPDM/PTFE, 7.76 in L x 3.84 in W x 2.28 in H Dimensions, Import
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg
- Blowout-proof stem
- Reinforced PTFE seat rings
- Multiple handle options
- Not intended for gas use
- The NIBCO Press System ball valve body is manufactured from lead free Brass alloy and is dezincification resistant (DZR)
- The ball valve is designed with a PEX x Press-to-connect end connections and is an ideal valve to transition from copper to PEX piping
- The PEX connection is F1807 (crimp) type
- The press-to-connect end is engineered with an inboard bead and a leak detection EPDM O-ring press end for quick and easy copper to copper joinery
- Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
Applications:
For drinking water, domestic hot and cold water, HVAC (condensers, chilled water, hot water heating), isolation and throttling (half-open to full-open only) and to connect to rigid copper tubing manufactured per ASTM B88, condition H (hard drawn)
Standards/Approval:
- ASTM F1807/D2000/C46500
- IAPMO/ANSI Z1157
- IGC 157
- Low Lead Compliant
- MSS SP-110/SP-145
- NSF/ANSI 61/372
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
2 years
