Description
EATON Photoelectric Sensor, 3/4-Wire Forward Viewing, Series: Prism®, Tubular Shape, Non-Polarized Retroreflective Sensing Method, 15 ft Sensing, Red Laser Sensing Beam, 3 ms Response, Solid State Relay Output, 20 to 132 V AC/15 to 30 V DC, 80/110 mA, 1.5 W Wattage, 50/60 Hz Frequency, Cable Connection, LED Light Source, 30 gn Vibration, 0.47 in L x 0.71 in W x 2.75 in H Size, NEMA 1/3/4/4X/6/6P/12/13 Enclosure, -13 to 131 deg F Operating, Surface Mounting
Features:
- Small size for use in a wide variety of applications and locations
- High sensing power for longer range and resistance to dust and dirt
- Adjustable gain control to ensure peak optical performance
- High noise immunity which greatly reduces problems associated with electrical noise
- AC DC models which allow you to order and stock one model for both voltages
- Isolated outputs for wiring flexibility
- Short circuit protection
- Highly visible output status LED
- Structural polyurethane foam body, PVC cable and polycarbonate lens
- 400 VAC maximum output isolation
- 200 VAC peak/180 VDC voltage switching capacity
- 10 uA maximum OFF state leakage
- 25 Ohm maximum on-state resistance
- Light steady when output is on
- LED indicator
- 18 mm Dia sensor
- 80 mA AC load, 110 mA at 132 VDC (derate to 100 mA at 180 VDC) current switching capacity
- 30 g over 10 Hz to 2 kHz vibration
Applications:
Electrical Assemblies, Panels, EOEM Electrical Assemblies Applications
Standards/Approval:
- UL Recognized,cUL Recognized,CE Marked
Warranty:
3 years
