NIBCO® Press System® Ball Valve, 3/4 in, 250 psi, Brass Body

Description

NIBCO® Press System® Ball Valve, 2-Piece 1/4-Turn, Series: PC-FP600A-LF-HC, 3/4 in Nominal, Female Press x Hose, 250 psi, 250 deg F, Full Port, Media: Water, 0.79 in Orifice, Standard Lever Handle Actuator, Polished Chrome Brass Ball, 3.52 in Inlet to Outlet Length, 2.06 in Top to Inlet Center, Forged DZR Brass Body, Brass/PTFE Trim, EPDM/PTFE, 6.03 in L x 2.84 in W x 1.58 in H Dimensions, Import

Features:

• Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
• Maximum service temperature 250 deg F
• Blowout-proof stem
• Reinforced PTFE seat rings
• Multiple handle options
• Not intended for gas use
• The body is manufactured from lead free Brass alloy and is dezincification resistant (DZR)
• The ball valve is designed with press-to-connect end connections with an inboard bead and EPDM O-ring for quick and easy copper to copper joinery
• Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux

Standards/Approval:

• ASTM D2000/C46500
• cUPC Listed
• IAPMO/ANSI Z1157
• IGC 157
• Low Lead Compliant
• MSS SP-145
• NSF/ANSI 61/372
• PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Warranty:

2 years

Actuator Type	Standard Lever Handle
Ball Material	Polished Chrome Brass
Body Material	Forged DZR Brass
Dimensions	6.03 in L x 2.84 in W x 1.58 in H
Domestic/Import	Import
End Style	Female Press x Hose
Inlet to Outlet Length	3.52 in
Media	Water
Nominal Size	3/4 in
Orifice Size	0.79 in
Port Type	Full
Pressure Rating	250 psi CWP
Series	PC-FP600A-LF-HC
Softgoods Material	EPDM/PTFE
Temperature Rating	250 deg F
Top to Inlet Center	2.06 in
Trim Material	Brass/PTFE
Manufacturer	NIBCO®