Description
NIBCO® HydraPure® Ball Valve, 2-Piece, Series: PC-585-66-LF-SS, 2 in Nominal, Female Press x Press, 250 psi, 250 deg F, Full Port, Media: Water, 2 in Orifice, 316 Stainless Steel Ball, 8.4 in Inlet to Outlet Length, 3.56 in Top to Inlet Center, DZR Silicon Bronze Body, 316 Stainless Steel Trim, EPDM/PTFE, Domestic
Features:
- Valve pressure rating 250 psi/17.2 bar non-shock cold working pressure
- Maximum service temperature 250 deg
- Blowout-proof stem
- Reinforced PTFE seat rings
- Press leak-detection feature
- Multiple handle options, including NIB-Seal
- The NIBCO Press System ball valve body is manufactured from lead free HydraPure Performance Bronze alloy and is dezincification resistant
- The ball valve is designed with press-to-connect copper end connections with an inboard bead and EPDM O-ring for quick and easy copper to copper joinery
- Properly applying pressure from a press-fit tool tightens the O-ring onto the tube, ensuring a clean, permanent, watertight seal in seconds, with no flame, solder or flux
Applications:
For use in systems that deliver water for human consumption
Standards/Approval:
- ASTM A276 Ball/Stem
- ASTM B584 Alloy C87600 Body
- MSS SP-110
- cUPC Listed
- IAPMO/ANSI Z1157 (IGC-157)
- Low Lead Compliant NSF/ANSI 372
- MSS SP-145
- NSF/ANSI-61-8 Commercial Hot 180 deg F (Includes Annex F and G)
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
