Description
Apollo™, 6WC10HN1LF, Check Valve, Wafer Body, Series: 910WB-LF, 12 in Nominal, Flanged End Style, 250 psi Pressure, 125 lb Pressure Class, 180 deg F, Full Port, Media: Water, 7.12 in Inlet to Outlet Length, Cast Iron Body, Aluminum Bronze/316 Stainless Steel Trim, Nitrile (Buna-N) Softgoods, Epoxy Coated, 16 in H x 7.12 in W Dimensions
Features:
- The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average
- Buna-N stem seal and glass reinforced epoxy resin bushing
- Black Buna-N seat
- Polished disc edge ensures long seat life, minimal torque
- 1-piece wafer design with flange locating holes in larger sizes
- Through shaft assures positive disc positioning and dependable performance
- Square shaft-to-disc connection provides a robust shaft-to-disc connection without pins or bolts
- Shaft equipped with weather seal to prevent external media from entering the shaft bore
- Isolates body from process media
- Valves are equipped with a stretch-resistant, non-collapsible blow-out proof seat
- Phenolic stiffener ring, resilient seated
- Seat design eliminates the need for flange gaskets
- Designed to dimensions for easy mounting of Apollo actuators and manual operators
- Supports shaft at three locations to enhance shaft alignment and absorb actuator side thrusts
- Precision machined disc edge creates Bubble tight shut-off, primary seal
Applications:
potable water|heating|cooling
Standards/Approval:
- ASTM A126 CL B Body
- CSA Certified
- cCSAus Certified
- FDA Food Grade
- NSF/ANSI 61
- NSF/ANSI 372
- PROP65: Cancer and Reproductive Harm
Warranty:
5 Years
