Description
LEESON® Washguard® Gear Motor, Parallel Shaft Continuous Duty, Series: PE350, 90 V DC, 2.3 A Full Load Amperage, 0.25 hp, 3, 250 rpm Maximum, 3/4 in Shaft Dia, 1.62 in Shaft Length, Reversible, 45 in-lb, 10:1 Gear Ratio, Helical/Spur Gear, Permanent Split Capacitor Motor, Ball Bearing, 201 lb Overhung Load, Special Mount, 40 deg C Ambient, Class F Insulation, Totally Enclosed Nonvented (TENV), Steel Housing, White Epoxy Painted, 13.84 in L x 6 in W x 6.7 in H
Features:
- Frame, end shields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalis and oil
- Lubrication is permanent semi-fluid grease and reducing possibility of leakage
- For any condensation that may accumulate inside the motor, one way stainless steel vapor vent is provided
- All hardware is stainless steel, painted with white epoxy for superior corrosion resistance and protection
- Machined fits between the end bells and motor frame are sealed with gaskets
- Thru-bolt heads and nuts sealed with fiber washers, O-rings under each threaded brush cover
- Intermittent duty
- 1.0 service factor and 70 deg C ambient rated
- Three bolt circles, 12 mounting holes, and face mounting to accept both the IMO and Allweiler pumps
- 10 foot long leads, spliced 40 in from motor to prevent wicking of hydraulic fluid
- Thermostat leads are marked P1 and P2
- Two stainless steel nameplates, one shipped separate for remote mount
- Gearbox output shafts are coated with Mirolon 3300 fortified Teflon for superior corrosion resistance
- Precision machined in-line steel gears, First stage steel helical gear followed by spur-type gears
- Output shafts have needle bearings for high load capacities, Gearbox shafts are hardened steel
- Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out, Conduit box cover is made from 304 stainless steel
Applications:
Wet and High Humidity Applications
Standards/Approval:
- CSA Certified
- CE Certified
- UL Listed
- USDA Approved
Warranty:
1 Year
