LEESON® DC Gearmotor, 1/8 hp, 90 V DC, P300 Series

Description

LEESON® DC Gearmotor, Parallel Shaft SCR Rated, Series: P300, 90 V DC, 1.3 A Full Load Amperage, 1/8 hp, 94 rpm Maximum, 5/8 in Shaft Diameter, 0.661 in Shaft Length, 77 in-lb Torque, 19:1 Gear Ratio, P302-30E Gear, Needle Bearing, 77 lb Overhung Load, 40 deg C, Class F3 Insulation, TENV Enclosure, Steel Housing Material, 11.54 in L x 4 in W x 5.13 in H Dimensions

Features:

• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
• Lubrication is permanent semi-fluid grease, reducing possibility of leakage
• Shafts are hardened steel
• Performance matched for continuous duty service
• Meets T3B temperature code with a maximum surface temperature of 329 deg F
• Permanently lubricated, sealed bearings extend the lifetime of the motor
• 140 frame motor and below include explosion proof conduit box, shipped loose
• Operational at 115/208-230 V at 60HZ
• Output shafts have needle bearings to handle high load capacities

Applications:

For mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail

Standards/Approval:

• CE
• CSA Certified
• UL Listed

Bearing Type	Needle
Dimensions	11.54 in L x 4 in W x 5.13 in H
Enclosure Type	TENV
Full Load Amperage	1.3 A
Gear Ratio	19:1
Gear Type	P302-30E
Horsepower	1/8 hp
Housing Material	Steel
Insulation Type	Class F3
Maximum Speed	94 rpm
Overhung Load	77 lb
Series	P300
Shaft Diameter	5/8 in
Shaft Length	0.661 in
Temperature Rating	40 deg C
Torque Rating	77 in-lb
Type	Parallel Shaft SCR Rated
Manufacturer	LEESON®