LEESON® DC Gearmotor, 90 V DC, 1/8 hp, 280 in-lb Torque

Description

LEESON® DC Gearmotor, Low Voltage Parallel Shaft, Series: P300, 90 V DC, 1.3 A Full Load Amperage, 1/8 hp, 24 rpm Maximum, 5/8 in Shaft Diameter, 0.661 in Shaft Length, 280 in-lb Torque, 76:1 Gear Ratio, P303-30E Gear, Needle Bearing, 280 lb Overhung Load, 40 deg C, Class F3 Insulation, TENV Enclosure, Steel Housing Material, 11.54 in L x 4 in W x 5.13 in H Dimensions

Features:

• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
• Lubrication is permanent semi-fluid grease, reducing possibility of leakage
• Shafts are hardened steel
• Performance matched for continuous duty service
• MaxGuard No lead lengths restrictions on 460V systems or less (as noted)
• Constant torque operation from 0 to base speed on vector drive
• Double-shielded ball bearings provide longer service life
• Normally closed thermostats (one per phase, Class F or H as noted)
• Output shafts have needle bearings to handle high load capacities

Applications:

For mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail

Standards/Approval:

• CE
• CSA Certified
• UL Listed

Bearing Type	Needle
Dimensions	11.54 in L x 4 in W x 5.13 in H
Enclosure Type	TENV
Full Load Amperage	1.3 A
Gear Ratio	76:1
Gear Type	P303-30E
Horsepower	1/8 hp
Housing Material	Steel
Insulation Type	Class F3
Maximum Speed	24 rpm
Overhung Load	280 lb
Series	P300
Shaft Diameter	5/8 in
Shaft Length	0.661 in
Temperature Rating	40 deg C
Torque Rating	280 in-lb
Type	Low Voltage Parallel Shaft
Manufacturer	LEESON®