LEESON® DC Gearmotor, 1/17 hp, 90 V DC, PZ Series, 60 rpm

Description

LEESON® DC Gearmotor, Parallel Shaft SCR Rated, Series: PZ, 90 V DC, 0.8 A Full Load Amperage, 1/17 hp, 60 rpm Maximum, 1/2 in Shaft Diameter, 1 in Shaft Length, 56 in-lb Torque, 30:1 Gear Ratio, PZ3-30B Gear, Needle Bearing, 171 lb Overhung Load, 40 deg C, Class F3 Insulation, TENV Enclosure, Steel Housing Material, 8.74 in L x 3.75 in W x 3.97 in H Dimensions

Features:

• Precision machined in-line steel gears
• First stage steel helical gear followed by spur-type gears
• Lubrication is permanent semi-fluid grease, reducing possibility of leakage
• Shafts are hardened steel
• Performance matched for continuous duty service
• Totally enclosed
• Direct drive, air over
• Horizontal or vertical mount
• Weather resistant reversing plug
• BX connector mounted in frame
• 1 in Extended thru-bolts
• 48Y Frame has non-standard BA dimension
• Automatic reset thermal protection
• Output shafts have needle bearings to handle high load capacities
• Optional conduit box and PZ gearmotor mounting brackets available

Applications:

For mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail

Standards/Approval:

• CE
• CSA Certified
• UL Listed

Bearing Type	Needle
Dimensions	8.74 in L x 3.75 in W x 3.97 in H
Enclosure Type	TENV
Full Load Amperage	0.8 A
Gear Ratio	30:1
Gear Type	PZ3-30B
Horsepower	1/17 hp
Housing Material	Steel
Insulation Type	Class F3
Maximum Speed	60 rpm
Overhung Load	171 lb
Series	PZ
Shaft Diameter	1/2 in
Shaft Length	1 in
Temperature Rating	40 deg C
Torque Rating	56 in-lb
Type	Parallel Shaft SCR Rated
Manufacturer	LEESON ELECTRIC CORPORATION