Description
LEESON® AC Motor, Type AC Continuous Duty, C Face With Base, 91.7% Full Load Efficiency Special Features, 10 hp, 208 to 230/460 V AC, 26.8 A, 50/60 Hz Frequency, 1800 rpm Speed, 1 Speed, TENV Enclosure, 215TC Frame, 1-3/8 in Dia Shaft, Reversible Rotation, 1.149 Service Factor, Ball Bearing, Rigid Mounting, 40 deg C, Insulation Class: Class F, Stainless Steel, 18.69 in L Dimensions
Features:
- Nothing on the motors exterior is painted or coated in any way
- Full fact nameplate is laser etched on the motor frame - no separately attached nameplate to trap dirt or contaminants
- Removable hydrophobic breathers in opposite shaft endbell and conduit box equalize pressure without allowing moisture to enter
- Exterior fastener use minimized reducing the number of entry points for moisture
- There are no holes in the frame for attaching ok nameplate
- Bearing lock screws are located inside the motor and conduit box
- Interior coatings applied to rotor and stator to protect against corrosion
- New conduit box mounting system provides optimum sealing
- Ease to clean construction is BISSC certified for bakery applications
- LEESON's exclusive IRIS Inverter-Rated Insulation System provides extra protection and long life, especially in inverter-driven applications
- Double-shielded bearings extend the service life of the motor
- EXXON Polyrex EM Grease supports extreme temperatures between -20 deg F(-29 deg C) and +350 deg F(+177 deg C)
- Shaft flingers protect bearings from damage caused by dirt and rain
- Condensation drains allow the motor to expel and drain built-up moisture
- All exterior components are 300-series stainless steel, All sealing components are Viton for superior chemical resistance
- End shields are O-ring sealed to the frame, Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
- Double-sealed bearings are pre-lubricated with moisture-resistant high temperature grease for long life
Applications:
For food processing and beverage industries, these motors are also ideal in clean room and severe chemical processing applications
Standards/Approval:
- CE Marked
- CSA File No. LR2025, UL File No. E49747
