Description
LEESON® Washguard® AC Motor, 2-Pole Continuous Duty, Jet Pump (JM/JP) Motors Application, 5 hp, 230/460 V AC, 12/6 A, 60 Hz Frequency, 3 ph, 3495 rpm Speed, 1 Speed, TEFC Enclosure, 184JM Frame, 0.88 in Dia x 4.21 in L Shaft, Reversible Rotation, 1.15 Service Factor, Ball Bearing, 7.5 ft-lb Torque, C-Face/Rigid Base Mounting, 40 deg C, Insulation Class: Class F, Stainless Steel, 10:1 Variable Torque Speed, 16.77 in L x 10.3 in H Dimensions
Features:
- All exterior components are 300 series stainless steel
- All sealing components are FKM for superior chemical resistance
- Full fact nameplate is laser etched on the motor frame
- End shields are O-ring sealed to the frame
- Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
- Exterior fastener use minimized reducing the number of entry points for moisture
- Double sealed bearings are pre-lubricated with moisture resistant high temperature grease for long life
- Interior coatings applied to rotor and stator protect against corrosion and ease to clean construction
- New conduit box mounting system provides optimum sealing
- LEESON's exclusive IRIS Inverter-Rated Insulation System provides extra protection and long life, especially in inverter-driven applications
- Life-Line - Condenser Fan - Heat Pump Motor
- Permanent Split Capacitor (PSC), Capacitor Required - 7.5 Mfd-370 V (Not Supplied with Motor)
- Thermally Protected
- 1/2 in Diameter Shaft with Double Flat Leads
- Extended Studs, Mounting Holes in Shell, Belly Band Mount
- Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
- Windings are immersed and cured in polyester insulating varnish for extra moisture-resistance
Applications:
Pharmaceutical, Food Processing, Beverage Industries, Clean Room and Severe Chemical-Processing, Bakery, Commercial and Industrial Applications
Standards/Approval:
- BISSC 769
- CSA Certified
- CSA LR33543
- UL E57948
Warranty:
1 Year
