Description
LEESON® AC Motor, Type AC Continuous Duty, C Face With Base, 89.5% Full Load Efficiency Special Features, 5 hp, 208 to 230/460 V AC, 12.6 A, 60 Hz Frequency, 1800 rpm Speed, 1 Speed, TENV Enclosure, 184TC Frame, 1-1/8 in Dia Shaft, Reversible Rotation, 1.149 Service Factor, Ball Bearing, Rigid Mounting, 40 deg C, Insulation Class: Class F, Stainless Steel, 15.77 in L Dimensions
Features:
- Nothing on the motors exterior is painted or coated in any way
- Full fact nameplate is laser etched on the motor frame - no separately attached nameplate to trap dirt or contaminants
- Removable hydrophobic breathers in opposite shaft endbell and conduit box equalize pressure without allowing moisture to enter
- Exterior fastener use minimized reducing the number of entry points for moisture
- There are no holes in the frame for attaching ok nameplate
- Bearing lock screws are located inside the motor and conduit box
- Interior coatings applied to rotor and stator to protect against corrosion
- New conduit box mounting system provides optimum sealing
- Ease to clean construction is BISSC certified for bakery applications
- WASHGUARD efficiencies meet EPAct mandates for non-exempt motors when tested without shaft seals
- LEESON's exclusive IRIS Inverter-Rated Insulation System provides extra protection and long life, especially in inverter-driven applications
- Meets T3B temperature code with a maximum surface temperature of 329 deg F
- Permanently lubricated, sealed bearings extend the lifetime of the motor
- 140 frame motor and below include explosion proof conduit box, shipped loose
- All exterior components are 300-series stainless steel, All sealing components are Viton for superior chemical resistance
- End shields are O-ring sealed to the frame, Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
Applications:
For food processing and beverage industries, these motors are also ideal in clean room and severe chemical processing applications
Standards/Approval:
- CE Marked
- CSA File No. LR2025
- UL File No. E49747
