Description
LEESON® Washguard® Extreme Duck® AC Motor, 4-Pole Continuous Duty, 0.75 hp, 208 to 230/460 V AC, 2.4 to 2.3/1.15 A, 60 Hz Frequency, 3 ph, 1725 rpm Speed, 1 Speed, TENV Enclosure, 56C Frame, 0.63 in Dia x 1.88 in L Shaft, Reversible Rotation, 1.15 Service Factor, Ball Bearing, 36 ft-lb Torque, C-Face/Rigid Base Mounting, 40 deg C, Insulation Class: Class F, Rolled Steel, 10:1 Variable Torque Speed, 11.47 in L x 6.5 in W x 6.78 in H Dimensions
Features:
- Double sealed bearings are pre-lubricated with moisture resistant high temperature grease for long life
- Interior coatings applied to rotor and stator protect against corrosion and ease to clean construction
- Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
- Washguard® efficiencies meet EPAct mandates for non exempt motors when tested without shaft seals
- Exclusive IRIS® inverter duty insulation system provides extra protection and long life and especially in inverter-driven applications
- IP69K enclosure protection
- Q-Car™ rotor cartridge for quick access color coded leads and full fact nameplate is laser etched on the motor frame
- Patent-pending 360 deg rotatable conduit box
- Designed for various degrees of ingress protection (IP69)
- Operational at 208-230/460 V at 60Hz.
- Gearbox output shafts are coated with Mirolon 3300 fortified Teflon for superior corrosion resistance
- Frame, end shields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalies and oil
- Precision machined in-line steel gears, First stage steel helical gear followed by spur-type gears
- Lubrication is permanent semi-fluid grease, reducing possibility of leakage
- Output shafts have needle bearings for high load capacities, Gearbox shafts are hardened steel
- Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out, Conduit box cover is made from 304 stainless steel
- For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided
- All hardware is stainless steel, Painted with white epoxy for superior corrosion resistance and protection
- PMAChined fits between the end bells and motor frame are sealed with gaskets
- Thru-bolt heads and nuts sealed with fiber washers, O-rings under each threaded brush cover
Applications:
Bakery, Commercial and Industrial Applications
Standards/Approval:
- BISSC/CE/CSA Certified
- UL Listed
Warranty:
1 Year
