Description
LEESON® AC Motor, Type AC Continuous Duty, C Face With Base, 78.5% Full Load Efficiency Special Features, 1/2 hp, 208 to 230/460 V AC, 1.6 A, 50/60 Hz Frequency, 1800 rpm Speed, 1 Speed, TENV Enclosure, 56C Frame, 5/8 in Dia Shaft, Reversible Rotation, 1.149 Service Factor, Ball Bearing, 96 ft-oz Torque, Rigid Mounting, 40 deg C, Insulation Class: Class F, Stainless Steel, 0.417 Constant Torque Speed, 10.72 in L Dimensions
Features:
- Double lip viton shaft seal used on non-drive output shaft on TEFC motors
- Minimal exterior fasteners due to no through bolt design and screw on conduit box covers reduces surface areas that may trap contaminants
- Double sealed bearings are pre-lubricated with moisture resistant, high temperature grease for long life
- O-ring sealed openings on conduit box covers and rotor/cartridge cover
- Rigid cast base for rugged application
- Conduit box lead hole location rotatable on TEFC designs
- Full fact nameplate is laser etched to the motor frame surface making the frame surface smooth, which eliminates areas that can trap contaminants
- Ease of clean construction is BISSC certified for bakery applications and motors meet Pharmaceutical duty specifications
- IP56 enclosure protection
- Motors meet EPACT mandates for non-exempt motors when tested without shaft seals
- Total winding encapsulation using epoxy resin
- LEESON® exclusive inverter rated insulation system provides extra protection and long life, especially when used in applications driven by an inverter
- Exterior 300-series stainless steel resists corrosion and maintains strength for reliable operation
- Designed for various degrees of ingress protection (IP69)
- 1.15 service factor increases reliability and motor life
- Operational at 208-230/460 V at 60Hz.
- Meets T3B temperature code with a maximum surface temperature of 329 deg F
- Permanently lubricated, sealed bearings extend the lifetime of the motor
- 140 frame motor and below include explosion proof conduit box, shipped loose
Applications:
For food processing and beverage industries. these motors are also ideal in clean room and severe chemical processing applications
Standards/Approval:
- CE Marked
- CSA File No. LR2025
- UL File No. E49747
Warranty:
3 Years
