Description
LEESON® AC Motor, Type AC Continuous Duty, C Face With Base, 75% Efficiency Special Features, 1 hp, 115/208 to 230 V AC, 4.5 A, 50/60 Hz Frequency, 1800 rpm Speed, 1 Speed, TENV Enclosure, 56HC Frame, 5/8 in Dia Shaft, Selective CCW Rotation, 1.149 Service Factor, Ball Bearing, Rigid Mounting, 40 deg C, Insulation Class: Class F, Stainless Steel, 13.7 in L Dimensions
Features:
- Nothing on the motors exterior is painted or coated in any way
- Full fact nameplate is laser etched on the motor frame - no separately attached nameplate to trap dirt or contaminants
- Removable hydrophobic breathers in opposite shaft endbell and conduit box equalize pressure without allowing moisture to enter
- Exterior fastener use minimized reducing the number of entry points for moisture
- There are no holes in the frame for attaching ok nameplate
- Bearing lock screws are located inside the motor and conduit box
- Interior coatings applied to rotor and stator to protect against corrosion
- New conduit box mounting system provides optimum sealing
- Ease to clean construction is BISSC certified for bakery applications
- Operational at 115/208-230 V at 60Hz
- Class H inverter rated insulation system
- Constant torque operation from 0 to base RPM rating with vector drives
- TEBC designs utilize 3-phase blower motors
- Normally closed thermostats
- Cast iron, Steel and Aluminum frame construction
- Provisions for Encoder feedback devices
- Precision balanced rotors
- All exterior components are 300-series stainless steel, All sealing components are Viton for superior chemical resistance
- End shields are O-ring sealed to the frame, Double lip shaft seals on both ends of TEFC motors (shaft end only on TENV motors)
- Double-sealed bearings are pre-lubricated with moisture-resistant high temperature grease for long life
Applications:
For food processing and beverage industries, these motors are also ideal in clean room and severe chemical processing applications
Standards/Approval:
- CSA File No. LR2025
- UL File No. E49747
