Description
NIBCO® Ball Valve, 2-Piece 1/4 Turn, Series: S-585-70-LX, 3/4 in Nominal, Solder, 600 psi, 400 deg F, Full Port, Media: Gas/Steam/Water, 3/4 in Orifice, Standard Lever Handle Actuator, Polished Chrome Brass Ball, 3-1/4 in Inlet to Outlet Length, 2-1/4 in Top to Inlet Center, DZR Cast Red Bronze Body, Silicon Bronze Trim, PTFE, 6-1/4 in L Dimensions, Domestic
Features:
- Valve pressure rating 600 psi 41.4 bar non-shock cold working pressure
- Maximum temperature rating 400 deg
- Blowout-proof stem
- Solder end connections
- Dezincification resistant
- Use in U.S. drinking water applications is prohibited after January 3, 2014
- The NIBCO two-piece ball valve features solder ends for quick and efficient installation
- The valve's reinforced PTFE seat ring and brass hard chrome plated ball exhibit high chemical resistance properties, and is recommended for many high pressure applications
Applications:
For commercial and light industrial process applications that may include HVAC, hot and cold domestic water, low pressure steam, compressed air, LP gas and natural gas
Standards/Approval:
- ASTM B124 Alloy C37700/ASTM B16 Alloy C36000 Ball
- ASTM B371 Alloy C69300/ASTM B99 Alloy C65100 Stem
- ASTM B584 Alloy C84400 Body
- MSS SP-110
- Low Lead Compliant
- PROP65: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
5 years Limited
