Description
Anvil® Concrete Insert Complete, Series: FIG 282, 1/2 in Rod Dia, 1130 lb, Malleable Iron, Galvanized, 3-3/8 in L x 3-1/4 in W x 2-3/16 in H, Domestic
Features:
- Opening in top of insert provides for use of reinforcing rods up to 7/8" diameter.
- Cast body prevents concrete seepage
- Opening in top of insert provides for use of reinforcing rods up to 7/8 in Dia
- Sides of insert are recessed for reinforcing rods up to 1 in Dia
- Low height, broad flat bottom and widely separated nail slots minimize displacement during construction
- The nut held in place by V-type teeth on both insert and nut can be raised and moved from side to side providing for lateral adjustment
- Rod is locked in place by screwing it firmly against the top of the recess
- One body size
Applications:
Upper attachment for suspending pipe, shafting, motors and similar equipment from a concrete ceiling especially suitable where rod sizes cannot be readily determined in advance
Standards/Approval:
- Federal Specification A-A-1192A (Type 18)
- ANSI/MSS SP-69
- FM Approved
- MSS SP-58 (Type 18)
- UL/ULC Listed
- WW-H-171-E (Type 18)
