High-Head Pump, 74 gpm, Liberty Pumps® FLH61A

Description

Liberty Pumps®, FLH61A, High-Head, Series: FLH60, 74 gpm Maximum, 15 ft Rated Head, Automatic/Non Automatic: Automatic, 1-1/2 in, 2 in FNPT Outlet, 6/10 hp, 115 V AC, 12 A Full Load/38.9 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 10 ft Cord, Cast Iron Multi-Vane Semi-Open Impeller, 104 deg F Continuous/140 deg F Intermittent, NEMA 1/4X Enclosure, Ball/Race Bearing, 11.2 in W x 7 in D x 16.4 in H Dimensions

Features:

• Permits passage of solids without clogging
• Heavy cast iron construction
• 416 stainless steel rotor shaft
• Permanently lubricated upper and lower ball bearings
• Unitized carbon and ceramic shaft seal
• 10 in Quick-connect power cord

Applications:

Step Systems, Mound Systems, Liquid Waste Transfer and Higher Head Dewatering Applications

Standards/Approval:

• cCSAus Certified
• SSPMA Certified
• PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Warranty:

3 Years Limited

Amperage Rating	12 A Full Load/38.9 A Locked Rotor
Automatic/Non Automatic	Automatic
Bearing Type	Ball/Race
Cord Type	SJOOW 10 ft
Dimensions	11.2 in W x 7 in D x 16.4 in H
Enclosure Type	NEMA 1/4X
Frequency Rating	60 Hz
Horsepower	6/10 hp
Impeller Type	Cast Iron Multi-Vane Semi-Open
Material	Cast Iron
Maximum Flow Rate	74 gpm
Motor Speed	3450 rpm
Outlet Size	1-1/2 in, 2 in FNPT
Phase	1
Rated Head	15 ft
Series	FLH60
Temperature Rating	104 deg F Continuous/140 deg F Intermittent
Manufacturer	Liberty Pumps®