The USCFW100016S1112EOPLZ Inverter by WEG Electric Corp is a state-of-the-art solution for motor control. This inverter is designed to optimize energy efficiency and performance in various applications. It features advanced technology and complies with international standards, ensuring reliability and safety. The compact design allows for easy installation, making it suitable for a wide range of industrial environments.
Item # CFW100016SAPLZ, Variable Frequency Drives, Low Voltage, CFW10, 1/4-3HP Micro Drive On WEG Electric Corp.
WEG Electric Corp. : Variable Frequency Drives : Low Voltage : Drives : CFW10, 1/4-3HP Micro Drive : Item # CFW100016SAPLZ
The WEG Digital CFW10 VFD Series is an offspring of the very successful CFW08 Plus. In addition to a very small, easily mounted package, simplified keypad and bright LED readout, complete diagnostics and fully programmable I/O, the CFW10 controls three phase AC motors with a single phase AC input, Single phase 120V AC input voltage will produce three phase 230V to drive motors up to 1 HP and single phase 230V AC will produce three phase 230V to drive motors up to 3 HP. Increased flexibility and decreased costs are achieved by eliminating the need for a step-up transformer to operate three phase 230V AC motors when only single phase 115V is available. The CFW10 is an economical solution to many industrial and commercial applications.
| Motor Volts | 230 V |
| Input Power Supply | Single Phase 120V |
| Phases | 3 |
| Motor HP | 1/4 |
| Drive AMPS | 1.6 |
| Frame Size | 1 |
| Enclosure | IP 20 Finger-Safe w/Potentiometer |
| V/Hz Control | Yes |
| Input Voltage | Single Phase 110-127V input voltage up to 1 HP. Single Phase 200-240V input voltage up to 3 HP. |
| Diagnostic Features | Over current, motor overload, drive over temperature, output short circuit, DC bus over and under voltage and external fault |
| Control features | Linear and S-Ramp acceleration and deceleration, local/remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, minimum and maximum adjustable frequency limits, adjustable output current limit, JOG |
| Display Readings | Motor speed, frequency, voltage, current, last fault, heatsink temperature and drive status |
| Ambient Temperature | 50 C |
| Altitude | 3300 ft1000 m |
| Humidity | 90% humidity, non-condensing |
| Current Overload Capacity | 150 % |
| Switching Frequency | 2.5-15 kHz adjustable switching frequency |
| Inputs | Four isolated programmable digital inputs. One isolated programmable analog input. |
| Outputs | Programmable relay output. |
| PWM Output | DSP controlled PWM output |
| Certifications | CE, UL for US and Canada |
| Notes | HP rating based on average FLA values. Use as a guide only. Motor FLA may vary with speed and manufacturer. ALWAYS compare motor FLA to Nominal AMPS of drive. For other technical data please refer to WEG product manual. |
| Dimensions | 5.2 x 3.8 x 4.8 |
| Approx. Shipping Weight | 2 lbs |
| Disclaimer | Data subject to change without notice. |
