The NON-PROGRAMMABLE FLOOR HEAT THERMOSTAT with a floor temperature sensor operates at 12V, providing precise control for radiant floor heating systems. Designed by Honeywell Resideo, this thermostat is easy to install and use, making it suitable for both residential and commercial applications. Its compact design fits seamlessly into any decor, while the reliable performance ensures optimal comfort. This thermostat meets industry standards, ensuring safety and efficiency in temperature regulation.
THERMOSTAT N-PROG A+F 12VDC DIGITAL
Residential Comfort/Combustion : Thermostats : Non-Programmable : TH114-AF : TH114-AF-12VDC/U
Low volt master thermostat for floor heating over 15 A
Overview
The TH114 Series delivers the features that matter most in a non-programmable thermostat: an easy-to-read backlit display, slim contemporary design and precise temperature control.
Features
- Three choices of temperature control in a single thermostat (Ambient, Floor, or Ambient with Floor temperature limits)
- 5 mA ground fault circuit interrupter (GFCI) on GA models
- 15 mA equipment ground fault protection devices (EGFPD) on GB models
- GFCI and EGFPD test light verifies safety control is functioning properly and alerts if a leak is detected
- Advanced temperature control ensures total comfort by minimizing temperature swings
- ON/STANDBY switch enables thermostat shutdown at the end of heating season for added security
- On-screen heating power indicator gives at-a-glance verification of power being used
- Backlit display
- Battery-free
Product Specifications
- Application
- Electric Heating; Master unit for radiant floor
- Dimensions (in.)
- 4.9 in X 2.8 in X 0.9 in
- Dimensions (mm)
- 124 mm X 70 mm X 23 mm
- Includes
- Aube AC112-01 North American Sensor, 15 feet (4.6 m) or 50 feet (15 m)
- Used With
- Aube AC112-01 North American Floor Sensor (15-feet/4.6-m); Aube CT230-120GA, CT230-120GB, CT230-240GA or CT230-240GB Floor Heating Slave Units
- Comments
- with backlight; works with CT230 slave units
- Item Type
- Product
- Mounting
- Vertical
- Electrical Ratings
- 75 mA @ 12 Vdc
- Approvals, CSA
- Approved
- Electrical Connections
- 6 in. (150 mm) tinned copper lead wires
- Supply Voltage
- 12 Vdc
- Switch Positions (System)
- C/F; AF (ambient + floor)/F (floor only)
- Operating Temperature Range (F)
- 32 F to 122 F
- Operating Temperature Range (C)
- 0 C to 50 C
- Sensor Element
- Thermistor
- Accuracy (F)
- 0.9 F
- Accuracy (C)
- 0.5 C
- Differential Temperature (F)
- 1 F
- Differential Temperature (C)
- 0.5 C
- Color
- White
- Ambient Temperature Range (F)
- AF mode: 32 F to 122 F; F mode: 32 F to 140 F
- Ambient Temperature Range (C)
- AF mode: 0 C to 50 C; F mode: 0 C to 60 C
- Switch Type
- With CT230 slave units
- LEDs
- GFCI fault light
- Power Method
- Hardwired
- Operation
- Must be linked to at least 1 slave unit (CT-230-XXXXX)
- Setting Temperature Range (F)
- 40 F to 86 F room temperature; 40 F to 104 F floor temperature
- Setting Temperature Range (C)
- 5 C to 30 C room temperature; 5 C to 40 C floor temperature
- Cycles per Hour
- 4
