Description
O-Z/Gedney Conduit Sealing Fitting, Type EYAM 25% Fill Female Dust-Ignitionproof Explosionproof Raintight, 3-1/2 in Size, For Use With: Threaded IMC/Rigid Metal Conduit, Surface Mounting, Malleable Iron, Chromate/Electroplated Zinc/Epoxy Powder Coated, 10-3/8 in L x 4-3/4 in W Dimensions
Features:
- Prevent passage of gases, vapors or flames from one portion of conduit system to another, restrict any explosion to the sealed off enclosure, prevent pressure piling within conduit system
- Required in class I, division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
- Required in class I, division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
- Required in class I, division 1 and 2 locations at the boundary where conduit leaves classified location
- Required in class I, division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
- Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, division 2 locations
- Smooth, rounded integral bushing in each hub to protect conductor insulation
- Accurately tapped, tapered threads for tight, rigid joints and ground continuity
- Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
- UL listed for use with Kwiko™ a sealing compound, also listed with certain competitors sealing cement
- Large opening for damming and filling
Applications:
For minimizing the passage of gases and vapors and prevent the passage of flames from one portion of the electrical system to another through the conduit
Standards/Approval:
- UL 886
- CSA C22.2
- Enclosure Class I Division 1/2 Group B/C/D, Class I Zone 1/2 Group IIA/IIB, Class II Division 1/2 Group E/F/G, Class III
