IDC Select® Pillow Block, UCPK Series, 20 mm Bore, 12.8 kN Load

Description

IDC Select® Pillow Block, Low Center Height Standard-Duty Solid Base, Series: UCPK, 20 mm Bore, 98 mm Bolt Center-to-Center Length, 31.75 mm Base to Bore Centerline, 127 mm Overall Length, 63 mm Overall Height, 31 mm Base Width, Set Screw Locking Device, Dual Contact Seal, 12.8 kN Load, -40 to 250 deg F, Cast Iron

Features:

• Dual heavy duty slinger type contact seals
• Cup point setscrews 120 deg apart lock unit securely to shaft
• Fully self-aligning
• 1-piece solid base cast iron housing
• 12.8 kN dynamic/6.65 kN static load capacity

Standards/Approval:

• ABMA Standard

Base to Bore Centerline	31.75 mm
Base Width	31 mm
Bolt Center-to-Center Length	98 mm
Bore Diameter	20 mm
Load Capacity	12.8 kN
Locking Device	Set Screw
Material	Cast Iron
Overall Height	63 mm
Overall Length	127 mm
Seal Type	Dual Contact
Series	UCPK
Temperature Rating	-40 to 250 deg F
Type	Low Center Height Standard-Duty Solid Base
Manufacturer	IDC Select®