Timken® Pillow Block Ball Bearing, 1-15/16 in Bore, Heavy Duty

Description

Timken® Pillow Block Ball Bearing Unit, Heavy Duty, Series: LSAO, 1-15/16 in Bore, 9 in Bolt Center-to-Center Length, 3-1/8 in Base to Bore Centerline, 11.374 in Overall Length, 2-5/8 in Overall Width, 5.843 in Overall Height, Two-Bolt Base Mounting, Round Bore, 3.126 in Base Width, Eccentric Collar Locking Device, Labyrinth Seal, Non-Expansion (Fixed), 15400 lb Dynamic/8510 lb Static Load, 250 deg F, 4380 rpm Maximum, Cast Iron, Uncoated

Features:

• All units are suited for installations where the load is heavy in proportion to the shaft diameter or where considerable shock loads exist
• All units are for use in wet or extremely dirty conditions
• These units are pre-lubricated and ready for immediate use
• A grease fitting is provided for relubrication
• LSAO pillow blocks are equipped with GN-KLLB wide-inner-ring ball bearings

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	3-1/8 in
Base Width	3.126 in
Bolt Center-to-Center Length	9 in
Bore Diameter	1-15/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	15400 lb Dynamic/8510 lb Static
Locking Device	Eccentric Collar
Material	Cast Iron
Maximum Speed	4380 rpm
Mounting Type	Two-Bolt Base
Overall Height	5.843 in
Overall Length	11.374 in
Overall Width	2-5/8 in
Seal Type	Labyrinth
Series	LSAO
Manufacturer	Timken®