Timken® Pillow Block Ball Bearing, 1.18 in Bore, Standard Duty

Description

Timken®, RAK1 3/16 PT, Pillow Block Ball Bearing Housed Unit, Standard Duty, Series: RAK Series, 1.18 in Bore, 4-5/8 in Bolt Center-to-Center Length, 1-9/16 in Base to Bore Centerline, 6.188 in Overall Length, 1.96 in Overall Width, 3.157 in Overall Height, Low Base Mounting, Round Bore, Eccentric Locking Device, Contact Seal, 4370 lb Dynamic/2530 lb Static Load, 250 deg F, 5800 rpm Maximum, Polymer

Features:

• Timken® Survivor® series pillow block and flanged units excel in highly corrosive environments
• A proprietary thin dense chrome (TDC) coating is applied to all bearing inserts for superior corrosion protection
• The TDC coating is designed to not crack or peel under known application conditions
• The unit is factory lubricated with FDA/USDA approved grease (class H1 lubricant) for incidental food contact

Applications:

Food and Beverage, Waste Water, Car Washes, Highway Salt and Sand, Chemical and Rubber, Pharmaceutical, Maritime, Paper Mills and Material Handling Applications

Standards/Approval:

• FDA Compliant
• Precision Class ABEC 1
• USDA Accepted

Base to Bore Centerline	1-9/16 in
Bolt Center-to-Center Length	4-5/8 in
Bore Diameter	1.18 in
Bore Type	Round
Load Capacity	4370 lb Dynamic/2530 lb Static
Locking Device	Eccentric
Material	Polymer
Maximum Speed	5800 rpm
Mounting Type	Low Base
Overall Height	3.157 in
Overall Length	6.188 in
Overall Width	1.96 in
Seal Type	Contact
Series	RAK Series
Temperature Rating	250 deg F
Type	Standard Duty
Manufacturer	Timken®