Hose Barb Ball Seat, Dixon® 2780808C, 1/2 in NPSM

Description

Dixon®, 2780808C, Hose Barb, Ball Seat, Series: 278, Fitting/Connector: Adapter, 1/2-14 x 1/2 in Nominal, Female NPSM x Hose Barb End Style, 15/16 in Hex, 1.88 in Length, 2 Barb, 1.02 in Barb Length, 350 psi Pressure, -40 to 150 deg F, Brass, Domestic

Features:

• Push-on fittings are intended for use with lok-on (push-on style) hose
• Lock-on fittings will properly grip lok-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap
• 1.02 in L barb
• 2 barbs
• No hose clamps or ferrules are needed
• Ball seat construction

Applications:

For pneumatic service, most fluids, low pressure hydraulics and non-potable water service

Standards/Approval:

• SAE J476/J512/J514/J516
• PROP65: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive ham. Wash hands after handling. For more information go to www.P65Wamings.ca.gov.

Warranty:

Limited

Barb Length	1.02 in
Domestic/Import	Domestic
End Style	Female NPSM x Hose Barb
Fitting/Connector Type	Adapter
Hex Size	15/16 in
Length	1.88 in
Material	Brass
Nominal Size	1/2-14 x 1/2 in
Number of Barb	2
Pressure Rating	350 psi
Series	278
Temperature Rating	-40 to 150 deg F
Type	Ball Seat
Manufacturer	Dixon®