Description
Anvil® C-Clamp, Series: FIG 88, 3/8 in Rod, 400 lb, 60 in-lbs Torque, Malleable Iron, Black Oxide, 450 deg F
Features:
- Recommended for attachment to “W” and “M” beams where thickness of flange Z does not exceed 0.75".
- Malleable body assures: Uniform quality and strength, full thread engagement
- Hardened steel cup point set screw for securing to beam flange
- Ribbed design of clamp provides added strength
- Installation: follow recommended set screw torque values per MSS-SP-69 and the Fig. 88 is only to be used on installations where the clamp cannot become dislodged from the beam
Applications:
For attachment to "W" and "M" beams where thickness of flange Z does not exceed 0.75 in, When clamp is used with Fig 89 retaining clip, flange thickness may not exceed 0.62 in
Standards/Approval:
- ANSI/MSS SP-69/SP-58 (Type 23)
- Federal Specification A-A-1192A (Type 23)/WW-H-171-E (Type 23)
- UL/ULC Listed
