Dodge® Pillow Block Roller Bearing, 3 in Bore, Cast Iron

Description

Dodge® Pillow Block Roller Bearing, Imperial Type E, Series: 215, 3 in Bore, 9.31 to 9.69 in Bolt Center-to-Center Length, 3-1/8 in Base to Bore Centerline, 12 in Overall Length, 3-1/2 in Overall Width, 6.32 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.99 in Base Width, Tapered Adapter Sleeve Locking Device, Trident™ Triple Lip Seal, Non-Expansion (Fixed) Expansion, 41500 lb Dynamic/53000 lb Static Load, -100 to 250 deg F, 2250 rpm Maximum, Cast Iron, Uncoated

Features:

• Steel cage with guide rings offers precision roller guidance
• Adapter sleeve improves concentricity and reduces inherent vibration
• Ease in mounting and dismounting achieved through patented adapter system
• Push-pull adapter mount
• Grease limiting speeds 30% higher than setscrew mounts
• All housings are class 30 gray iron
• Shaft ready installation
• Superior holding power reduces the fretting corrosion caused by vibration
• Seal/land on OD of inner ring maintains full contact pressure even when misaligned
• Less shaft damage vs setscrew mounts
• Reduced vibration damage vs setscrew mounts

Standards/Approval:

• ARRA Compliant
• Buy American Act Compliant
• RoHS Compliant
• UL Listed
• AGMA
• MPTA
• ABMA
• BSA
• PTDA
• CMA
• HI

Base to Bore Centerline	3-1/8 in
Base Width	2.99 in
Bolt Center-to-Center Length	9.31 to 9.69 in
Bore Diameter	3 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	41500 lb Dynamic/53000 lb Static
Locking Device	Tapered Adapter Sleeve
Material	Cast Iron
Maximum Speed	2250 rpm
Mounting Type	Two-Bolt Base
Overall Height	6.32 in
Overall Length	12 in
Overall Width	3-1/2 in
Seal Type	Trident™ Triple Lip
Series	215
Manufacturer	Dodge®