Timken® RAK1 7/16 Pillow Block Bearing, 1-7/16 in Bore

Description

Timken®, RAK1 7/16, Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1-7/16 in Bore, 5.126 in Bolt Center-to-Center Length, 1.813 in Base to Bore Centerline, 6.563 in Overall Length, 2-1/64 in Overall Width, 3.689 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.843 in Base Width, Eccentric Locking Device, Shroud Seal, Non-Expansion (Fixed), 5770 lb Dynamic/3440 lb Static Load, 250 deg F, 3930 rpm Maximum, Cast Iron, Uncoated

Features:

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with self-locking collar
• RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings

Applications:

Agriculture, Food Processing, Fans, Blowers and Conveyors

Base to Bore Centerline	1.813 in
Base Width	1.843 in
Bolt Center-to-Center Length	5.126 in
Bore Diameter	1-7/16 in
Bore Type	Round
Expansion Type	Non-Expansion (Fixed)
Finish	Uncoated
Load Capacity	5770 lb Dynamic/3440 lb Static
Locking Device	Eccentric
Material	Cast Iron
Maximum Speed	3930 rpm
Mounting Type	Two-Bolt Base
Overall Height	3.689 in
Overall Length	6.563 in
Overall Width	2-1/64 in
Seal Type	Shroud
Series	RAK
Manufacturer	Timken®