Description
Appleton® Pin and Sleeve Receptacle, Explosionproof, Series: CES, 120 to 250 V AC, 30 A, 3 hp, 3 Pole, 2 Wires, Class I/Division 1/2/Group D Enclosure, Pressure Wire Terminal, Aluminum, 8.31 in H x 4.69 in W x 4.94 in D Dimensions
Features:
- Factory sealed and no external seals required, arcing is safely confined to receptacle interior
- Energized receptacle contacts deeply recessed to reduce danger of accidental touching
- Style 2 (shell and extra pole) grounding
- Spring door keeps dust out of receptacle when plug is not in use
- Unique design brass contacts exert constant pressure along entire contact surface and provide superior electrical contact
- Contacts have beryllium copper wire springs
- Plug mechanical cable clamps prevent strain on cables; they meet or exceed UL strain relief pull-out requirements
- Neoprene bushing compressed by cable collar prevents entrance of water
- Insulators provide superior dielectric and mechanical strength and lowest arc tracking
- Smooth, rounded integral bushing in each hub protects conductor insulation
- Delayed action construction. To operate, insert plug to first stop, move Slide-Lok® slide to right and push plug fully forward
- CPH plug fits Powertite® Series hazardous location receptacles
- Triple-coat (1) zinc electroplate, (2) chromate and (3) epoxy powder coat finish
- Furnished with one vertical and two horizontal feed through hub
- CPH mating plug
- For locations where receptacles are used with stationary or portable electrically operated devices such as lighting systems, conveyors, heaters, motor generator sets applications
- For air conditioners, compressors and pumps, petrochemical plants, petroleum refineries, Paint and chemical plants and any location where ignitable vapors or gases are present applications
- 3/4 in hub
- Copper free (4/10 Of 1 PCT Maximum) aluminum receptacle and cover, malleable iron mounting box, fiber glass reinforced polyester insulating blocks
- Triple-coat (1) zinc electroplate, (2) chromate and (3) epoxy powder coat malleable iron mounting bodies , ceramic burnished aluminum receptacles, epoxy powder coat cord connector housings and caps
Applications:
Lighting Systems, Conveyors, Heaters, Motor-Generator Sets, Air Conditioners, Compressors and Pumps and Petrochemical Plants
Standards/Approval:
- UL 1010 (UL 1203)
- UL 894
- UL 1682
- UL 1686, E10784
- CSA C22. No 30, C22.2 No. 159, C22.2 No 182.1
